All Categories
- Industrial LCD display
-
Industrial Products
- DC Servo Drive
- AC Servo Drive
- other
- Heidelberg
- FANUC
- IFM
- Meter
- CCD
- Membrane Keypad
- Film
- YOKOGAWA Module
- Card
- ABB
- MITSUBISHI
- FANUC
- KEYENCE
- BECKHOFF
- Honeywell
- HOLLYSYS
- FUJI servo drives
- HP
- solenoid valve
- thermostat
- Siemens adapter
- color oscilloscope
- Fujitsu connector
- CHELIC
- SMC
- CISCO Module
- INTEL
- Key board
- FAIRCHILD
- Motherboard
- Board
- Bearing
- other
- Control Panel
- Contactor
- Circuit
- OMRON
- Relay
- Controller
- Photoelectric Switch
- Photoelectric Sensor
- Original
- Fan
- Motor Driver
- Limit Switch
- Amplifier
- power supply
- LENZE
- Cable
- Encoder
- Sensor
- Transformer
- Fiber Optic Sensor
- Protection Relay
- Temperature Controller
- Proximity Switch
- Switch Sensor
- Siemens
- Industrial board
- HMI Touch Glass
-
HMI Full Machine Whole unit
- OMRON HMI Touch Panel
- Siemens HMI Touch Panel
- Mitsubishi HMI Touch Panel
- Allen-Bradley automation HMI Touch Panel
- DELTA HMI Touch Panel
- EVIEW DELTA HMI Touch Panel
- KINCO DELTA HMI Touch Panel
- HITECH HMI Touch Panel
- WEINTECK HMI Touch Panel
- TECVIEW HMI Touch Panel
- WEINVIEW HMI Touch Panel
- PRO-FACE HMI Touch Panel
- SIMATIC HMI Touch Panel
- AMPIRE HMI Touch Panel
- HEIDELBERG HMI Touch Panel
- PANASONIC HMI Touch Panel
- PATLITE HMI Touch Panel
- KYOCERA HMI Touch Panel
- KEYENCE HMI Touch Panel
- WEINVIEW HMI Touch Panel
- HITECH HMI Touch Panel
- FUJI HMI Touch Panel
- HAKKO HMI Touch Panel
- SCHNEIDER HMI Touch Panel
- SAMKOON touch panel
- other
- Module
- lcd inverter
- Membrane Keypad Switch
- Winni Touch Screens
- Frequency Inverter
- Servo Motor
- PLC
Recommended Products
Home » Frequency Inverter » OMRON
B7A-T6C1 is a 16-point input terminal module that adopts PNP compatible input logic and supports 12V to 24V operating power supply.Support 2-wire or 3-wire VCTF cable transmission, and the transmission distance can reach 500m in standard mode.
$345.00
GRT1-AD2 is an analog input module launched by Omron. It provides a 2-point analog input channel, supports current or voltage signal input, adapts to PNP type input, and adopts 3-wire terminal blocks.
$345.00
GRT1-TS2P is a 2 platinum resistance input unit launched by Omron. It supports 2 independent platinum resistance inputs and is suitable for Pt100 or Pt1000 resistance thermometers, which can monitor two temperature points at the same time.
$405.00
GRT1-DA2C is a 2-point analog current output module of Omron SmartSlice series, which supports 0-20mA/4-20mA current output, is suitable for 24VDC power supply, and adopts DIN rail installation and screw terminal connection.
$500.00
GRT1-OD4-1 is a 4-point PNP digital output module of Omron GRT1 series, which supports 24V DC voltage and 500mA output current. It adopts a compact design and is compatible with DIN rail and screw installation.
$750.00
GRT1-OD4-1 is a 4-point PNP digital output module of Omron GRT1 series, which supports 24V DC voltage and 500mA output current. It adopts a compact design and is compatible with DIN rail and screw installation.
$170.00
GRT1-ID4-1 is a 4-point PNP digital input module of Omron GRT1 series, which supports DeviceNet/Component communication, has a compact design, and is compatible with DIN rail and screw installation.
$175.00
E5EN-R3MT-500-N is OMRON's digital thermostat, which is a special instrument for automation, with an intelligent design and supports low-voltage power supply.
$250.00
Applicable to：Medical display、Injection molding machine screen、navigation lcd、Automotive Display、projector lcd panel、industrial display、intelligent display、industrial lcd panels、monitor touch screen and so on
$850.00
3G3MX2-A4040-V2 Omron Control Unit module
$380.00
The use of ultra-fine light to realize sensing technology can accurately detect the location, presence or absence of objects and other information, ensuring stable detection performance in complex environments.
$47.00
E3Z-B81 is a compact photoelectric sensor from Omron with a built-in amplifier and a regression reflection detection method.Its detection distance can reach 500mm, the output type is PNP open collector output, and two connection methods are provided: wire lead-out type and M8 connector type.
$32.00
E3C-LD11 is a photoelectric sensor that uses a visual semiconductor laser as a light source. The detection distance is 30~700mm in standard mode and up to 1000mm in high-precision mode.
$187.00
E2E-X7D1-M1GJ is a proximity sensor produced by Omron. It detects metal targets through the principle of inductance without mechanical contact and reduces wear.The response frequency of 500Hz is suitable for high-speed motion control scenarios.
$25.00
D4NL-1CFG-B is an electromagnetic locking safety door switch from Omron that supports DC24V solenoid locking and mechanical release. It is equipped with a slow-acting forced disconnection of NC contacts and provides a 2NC+2NC contact structure.
$85.00
H5CX-A-N is a high-performance digital timer that provides signal turn-on delay, power turn-on delay, flicker control, interval timing, cumulative timing and other modes to adapt to complex control logic.
$82.00
TL-W5MC1 is an inductive proximity switch, mainly used to detect metal objects.It has a detection distance of 5mm and a variety of output modes, which can flexibly adapt to different application needs.
$14.00
R88D-KP04H is an AC servo drive that supports single-phase/three-phase AC200-240V power supply, continuous output current of 2.6A (rms), equipped with a 20bit high-resolution encoder, and a speed response frequency of 2kHz.
$308.00
I/O configuration: Provides 14-point digital input (PNP/NPN optional) and 10-point digital output (PNP), and supports 24V DC signals.
Expansion capability: It can be expanded to up to 8 units and supports 16 EtherCAT slave nodes to meet the needs of complex systems.
Storage and processing: equippe
$380.00
