HSD101PWW1-G10 10.1 inch 1280*800 LCD PANEL

Electrical Specifications - Input Side

• Rated Input Voltage: Single-Phase 200V ~ 230V AC (50/60 Hz)

• Input Current: ~10 A (Rated)

• Inrush Current Limit: Built-in circuit to suppress startup current.

Electrical Specifications - Output Side

• Rated Output Power: 1.0 kW

• Rated Output Current: ~6.5 A RMS

• Peak Output Current: ~19.5 A RMS (Typically 3x rated current)

• Output Voltage: 0 ~ Input Voltage Equivalent (3-Phase PWM)

• Carrier Frequency: Adjustable, typically 1 kHz to 15 kHz

Control & Feedback

• Control Mode: Torque, Speed, Position mode (Standard three-mode operation)

• Feedback Interface: Supports standard 2500 ppr incremental encoder and 17-bit/20-bit absolute encoder (compatible with the manufacturer's servo motors).

• Command Interface:

• Pulse / Direction inputs for position control.

• Analog Voltage inputs for speed/torque control (±10V).

• Communication Interface: Often equipped with a RS-485 or RS-232 communication port for parameter setting and basic control. Higher-end versions may support fieldbus like CANopen or EtherCAT.

Performance Characteristics

• Speed Control Range: 1:5000

• Speed Fluctuation: < ±0.03% (Rated speed)

• Frequency Response: > 500 Hz

• Auto Gain Tuning: Yes, with multiple modes (e.g., Standard, Low Rigidity, Manual).

• Auto Vibration Suppression: Yes, adaptive to mechanical resonance.

Protection & Safety Features

• Overcurrent Protection

• Overvoltage / Undervoltage Protection

• Overload Protection (Electronic Thermal Relay)

• Brake Resistor Control (Dynamic braking for motor deceleration)

• Safety Stoppage (STO): Safe Torque Off function (depending on the model and certification).

Environmental & Mechanical

• Operating Temperature: 0°C to +55°C (with derating above 45°C)

• Storage Temperature: -20°C to +65°C

• Humidity: 0~90% RH (non-condensing)

• Altitude: < 1000 m (above 1000m requires derating)

• Pollution Degree: 2

• Overvoltage Category: II

• Cooling Method: Natural Convection (Fanless)

• Protection Rating: IP20 (For installation inside a protective control cabinet).